远程设置、控制、采集

Setup. Control. Acquire

 

新的Vic-Snap Remote App将改变您的DIC设置方式

      该App允许用户在移动设备或平板电脑上查看实时图像来便捷的设置相机。 如: 通过手指滑动缩放实现对焦、利用十字准线完美地实现多摄像头的光轴对齐、调整曝光时间以使图像充分亮起(也可通过直方图调整)。 通过在屏幕上轻触点击即可完成标定图像的采集。 该App支持大多数iOS和Android设备。 现在就可以通过App Store和Google Play商店中下载安装。

Conveniently view live images on your mobile device or tablet while setting up the cameras. Zoom in with a pinch to adjust your focus. The crosshairs help align the cameras just perfectly. Control exposure to get your images well lit (the histogram helps, too). Acquire calibration images with a tap.  Compatible with most iOS and Android devices.  Now available on the App Store and the Google Play Store.

screenshot_exposure_phone_500

Available_on_the_App_Store_Badge_US-UK_135x40

Google-play-button

 

 

 
 

iPad-mini-screenshot_acquisistion_pad_horiz

特性 Features

  • 通过Vic-Snap图像采集系统中远程查看和采集图像
  • 用一台设备探测和控制多个Vic-Snap系统
  • 两指操作缩放实时图像
  • 双击图像进行全屏查看
  • 调整相机的曝光时间
  • 使用自动文件命名获取标定和测试图像
  • 切换十字准线以便双相机对齐
  • 查看灰度直方图以调整曝光
  • 使用红色和蓝色指示曝光过度和曝光不足
  • Remotely view and acquire images from Vic-Snap image acquisition systems
  • Detect and control multiple Vic-Snap systems with one device
  • Pinch-to-zoom live images
  • Double-tap images for full-screen viewing
  • Adjust the cameras’ exposure time
  • Acquire calibration and test images with automatic file naming
  • Toggle cross-hairs for alignment
  • View gray scale histogram for adjusting exposure
  • Over and under-exposure indicated using red and blue

 

 

常见问题 FAQs

Setup/Configuration

1. I want to try this, what do I need?

  • Download and install the latest version of Vic-Snap.
  • Download the Vic-Snap app from the App Store.
  • Connect the computer running the Vic-Snap system and your mobile device to the same network.

2. I do not have a wireless network in my lab, can I still use this?

  • Yes, but you will need some additional hardware. See below for options to connect the mobile device to your Vic-Snap system.

3. What is the best way to connect my iPhone or iPad and the image acquisition computer?

There are basically three options:

  •  If you already have a wireless network that you can reach the image acquisition computer from, you do not have to do anything. The advantage of this configuration is that you are probably connected to the internet and you can see all your Vic-Snap systems without having to switch networks. The disadvantage is that you may not get as much bandwidth if other users surf the internet or connect to another Vic-Snap system. Furthermore, the network connection depends on the distance to the wireless router and may not be consistent in all parts of the building.
  • Create a dedicated wireless network for your Vic-Snap system. For this, you will need a wireless router. The image acquisition systems can be connected to the wireless router either through a wired network or wirelessly. The advantage of this configuration is that all the bandwidth is dedicated to Vic-Snap and you can still see multiple Vic-Snap systems. Furthermore, you can place the wireless router next to your system and ensure you get a strong signal. This configuration is recommended when you have multiple systems that are used in close proximity.
  • You can create a wireless ad-hoc network on your image acquisition computer. If your computer does not have a wireless network interface, you can purchase a wireless USB dongle. This configuration is simple and dedicates the entire bandwidth to Vic-Snap, but is less convenient if you want to control multiple Vic-Snap systems from your mobile device because you have to switch networks.

If you need help deciding what to use or hardware recommendations, please contact our Support department.

4. When I start the Vic-Snap app, all I see is a message that says ‘Searching…’ What’s wrong?

There are several possible causes for this:

  • Vic-Snap is not running on your image acquisition system.
  • Mobile device support is disabled in Vic-Snap. Go to ‘Advanced options’ and verify that mobile device support is enabled.
  • The mobile device and the Vic-Snap image acquisition system are not connected to the same network. On your iPhone/iPad, go to the Settings app and verify that you are connected to the correct network.
  • A firewall may be blocking network traffic on your image acquisition computer. Make sure the firewall is turned off.

5. The image update rate on my mobile device is slow. What’s wrong?

  • This occurs when not enough network bandwidth is available. Make sure you have a strong wireless signal and your colleagues are not using Vic-Snap or streaming videos at the same time. The best solution to avoid this problem is to use a dedicated wireless network for Vic-Snap.

 

Usege

1. How do I use the exposure control?

  • The exposure control is a rotary knob. Touch the circle anywhere on the perimeter and drag it in a circle either clockwise or counter-clockwise to increase or decrease the exposure time.

2. The menu buttons went away and all I see is a message that says ‘Test running’. What is wrong?

  • While the Vic-Snap systems acquires images, the remote control and remote display features are temporarily disabled to ensure that the image acquisition system has all system resources available to acquire and store images at maximum rate. When the acquisition completes, the menu buttons will reappear on your mobile device.

3. I only see a blue image. What’s wrong?

  • The Vic-Snap app uses blue to indicate under-exposure. If the entire image is blue, either the exposure time is too short or the lens cap is on!!!

4. I only see a red image. What’s wrong?

  • The Vic-Snap app uses red to indicate over-exposure. Reduce the exposure time or stop down the lenses.

5. I only see one image, but I have two cameras connected. What’s wrong?

  • You probably double-tapped on one of the images. This maximizes the image and hides the second camera. Just double-tap to go back to the split-screen display with both cameras.

6. I do not notice any difference between displaying the entire image and the smaller areas of interest. What is this feature supposed to do?

  • This feature only produces a noticeable effect if the image resolution is large. To limit bandwidth, the image acquisition system down-samples large images before sending them to the mobile device. For example, when using 16MP cameras, the full-size image displayed on the mobile device is down-sampled by a factor of four in each direction. The area-of-interest feature avoids this down-sampling by only transmitting a partial image cropped from the center. This feature is helpful when focusing high resolution cameras.

7. I am trying to adjust the exposure time, but it keeps jumping around. What is happening?

  • Most likely, one of your colleagues has discovered the Vic-Snap app and is having a little fun at your expense…
 

Video Explanation

 

 

To see a short video explanation of this app, please click here.